Modelling outputs also include some inputs so that you can better understand changes in risk.
You can only view Fire Behaviour geospatial outputs from its child Impact Analysis runs.
Fire Behaviour | Description | Download file type | Geospatial file type | Project types | Location in RMP |
Model inputs |
|
|
|
|
|
Fire History |
| Raster | Vector Tiles | All projects (except Max Fuel Loads) |
|
Bush Fires (all seasons) |
| Raster | Vector Tiles | All projects (except Max Fuel Loads) |
|
Hazard Reduction Burn (all seasons) |
| Raster | Vector Tiles | All projects (except Max Fuel Loads) |
|
Fuel |
| Raster | Vector Tiles | All projects |
|
Total Fuel Load |
| Raster | Vector Tiles | All projects |
|
Grass Fuel Load |
| Raster | Vector Tiles | All projects |
|
Aspect |
| Raster | Vector Tiles | All projects |
|
Elevation |
| Raster | Vector Tiles | All projects |
|
Slope |
| Raster | Vector Tiles | All projects |
|
Fuel Management Register |
| Raster | Geojson | BFRMP (only in FT scenarios) |
|
Supplementary Wildfire History (SWF) | Optional input | Raster | Geojson |
Note: In the RMP Sandbox, you can add SWH to all BFRMP scenarios and Snapshot projects. |
|
Treatment Areas |
|
|
|
|
|
Phoenix outputs |
|
|
|
|
|
Rate of spread average |
| Database | Vector Tiles | All projects |
|
Flame height average |
| Database | Vector Tiles | All projects |
|
Intensity average |
| Database | Vector Tiles | All projects |
|
Classified times burnt average | Classification thresholds dictated by configuration, classification values from 0 to 5 inclusive | Database | Vector Tiles | All projects |
|
Times Burnt Average |
| Database | Vector Tiles | All projects |
|
Ignitions |
|
|
|
|
|
Fire size (at 12 hours — the ignition points predicted to cause the largest fire) |
| Points | Geojson | All projects |
Note: The Fire size geospatial layer is restricted to RBAC Admin and Predictive Services users. |